Fast Charger HW170 LT

Sale price$249.00

This fast charger was originally designed for cellular base stations from Huawei, now optimized for versatile use, including EUCs, scooters, ebikes and mopeds. Engineered for long-term consistency, this charger boasts reliability and adaptability.
Supporting an input range of AC 110V-240V, output range of DC 80-170V, this fast charger effortlessly fits into various power environments. Experience a maximum output of 3000W(max output 17A) for inputs above AC 200V, while delivering a maximum of 1500W(max output 10A) at AC 110V input.
Packing List: Fast charger x 1,  Protective Green Casing x 1, Split Pigtail * 1, Power cord *1(EU or North American standard)  Adapter set: up to your selection. 
Need more extra adapters, please get it here  Selection Guide.
Select The Included Adapter: GX16-4
VAT Included, +$39 for air shipping

Our typical shipping time is 7-10 business days.

READ BEFORE USE

instruction

  1. Pre-Inspection - Before Use:
    Before using the PIDZOOM fast Charger, thoroughly read this content. Inspect the charger for any damage to the body or wires. Ensure nothing has obstructed the vents or fans. Do not plug in the charger if you notice any damage. Conduct this inspection each time before using the charger.
  2. Prepare Charger Setup:
    Ensure correct setup to avoid irreversible damage. Incorrect settings can harm the charger or your personal electric vehicle (PEV).
  3. Plug In Charger:
    Connect the charger to a power outlet before connecting it to the PEV. Warning: Never connect the charger to a power outlet with the PEV attached.
  4. Select Preset Voltage for PEV:
    Choose the correct voltage for your PEV using the voltage preset selector knob at the charger's rear.
  5. Set Initial Current:
    Rotate Current Adjustment Knob counter-clockwise (from the rear view) until the knob stops. The display will read 0 Amps.
  6. Connect Charger to PEV:
    Safely plug the charger into the PEV's charge port. Monitor the LCD screen for proper charging indications.
  7. Fine-tune Charging Current:
    Using the Current Adjustment Knob set the desired charging current by rotating the knob clockwise. The max current for input < AC 200V is 10A, for input > AC 200V is 17A.
    Caution: Avoid surpassing the PEV's charging rate limit.
  8. Disconnecting PEV:
    Safely disconnect the PEV at any time without adjusting the settings or when charging is complete.

IF YOU ARE CHARGING A DIFFERENT PEV YOU MUST REPEAT THESE STEPS EACH TIME OR WHEN CHANGING INPUT VOLTAGE

Specifications

Output Current

  • 17A (For input > AC 200V)
  • 10A (For input < AC 200V)

Voltage

  • INPUT: AC 110~240V
  • OUTPUT: DC80-170V

Size

  • Dimensions: 11*4.1*1.6 inches (281*105*40.8mm)
  • Weight: 3.7 lbs (1.7 kg)

ADAPTERS LAYOUT